The double disc grinding prototype is a simple, reliable, and safe machine that utilizes spectral analysis to achieve a rough finish on specimen surfaces. The machine is equipped with two discs of the same diameter, allowing for simultaneous operation or a single-disc operation. This flexibility caters to varied grinding and polishing requirements.
One of the most significant strengths of the double disc grinding prototype is that it is environmentally friendly. The machine has a vacuum device that eliminates dust pollution, thus keeping operators safe and healthy. Additionally, the machine's wheel is easy to replace, eliminating dust emissions and noise pollution during the polishing process. This feature makes it ideal for use in environments where noise is a concern.
The prototype's technical parameters are impressive, and they contribute to its high performance. It has two discs, a fast disc operating at 2850 rev/min and a slow disc operating at 1450 rev/min. The grinding speeds are equally impressive, with the fast disc operating at 25-60 m/sec and the slow disc operating at 12.6-30 m/sec. The motor is a standard Y90S-2-1.5KW and Y90S-4-1.1KW, and the centrifugal fan has a 200mm impeller with a shaft direct-drive mode.
The machine's control type is button and switch-based, making it easy to operate. The dimensions of the machine are 1000mm long, 500mm wide, and 800mm high, with a weight of 200kg (removal of the brand name is necessary). These dimensions make the machine compact and versatile, and it can fit in many different work environments.
Overall, the double disc grinding prototype from Yunnan Machine Tool Works is an essential machine in the metallurgy, forging, and casting industries. Its precision, efficiency, and environmental friendliness make it a sought-after tool for grinding and polishing a wide range of specimens. Its technical parameters and control mechanisms are user-friendly, making it easy to use even for novice users.