| Item | Unit | Parameter |
| Spindle max. swing diameter | Φ | 550 |
| Spindle max. machining diameter | mm | 350 |
| Spindle Max. bar passing capacity | Φ | 52 |
| X-axis travel | mm | 230 |
| Z-axis travel | mm | 500 |
| Y-axis travel | mm | ±50 |
| Sub-spindle travel | mm | 500 |
| Max. distance from spindle nose to ground | mm | 800 |
| Feed | ||
| X-axis cutting feed rate | m/min | 30 |
| Z-axis cutting feed rate | m/min | 30 |
| Y-axis cutting feed rate | m/min | 10 |
| X-axis acceleration | m/s² | 10 |
| Z axis acceleration | m/s² | 10 |
| Y-axis acceleration | m/s² | 10 |
| Y-axis acceleration | m/s² | 30 |
| Precision | ||
| Positioning accuracy X/Z (Y) | mm | 0.008 |
| Repeatability X/Z (Y) | mm | 0.002 |
| Grating ruler | ||
| X-axis grating ruler | 0.001mm absolute | Nidec |
| Z-axis grating ruler | 0.001mm absolute | Nidec |
| Main motor | ||
| type | servo motor | |
| Maximum speed | Rpm | 4300 |
| Maximum power | mw | 15 (2:1 reduction ratio) |
| cooling method | air cooled | |
| Positioning method | Encoder | |
| Spindle and chuck system | ||
| Spindle specification | type | A2-6 |
| Chuck through hole | Φ | 65 |
| Chuck size | In | 8 inch |
| Chuck clamping method | N/m | hydraulic clamping |
| Max. speed | Rpm | 4500 |
| Bearing lubrication method | oil | |
| Arrange by | 3 in front, 2 in back | |
| Front bearing protection method | air maze protection | |
| Spindle motor | kw | 11 (2:1 reduction ratio) |
| Sub spindle and chuck system | ||
| Spindle specification | type | A2-5 |
| Spindle through hole | Φ | 42 |
| Chuck model | In | 5 |
| Sub spindle motor | Kw | 7.5 |
| Servo Turret System | ||
| Number of turret tools | Pockets | 12 |
| Tool change method | Servo motor drive | |
| Turret form | BMT | BMT-55 |
| Tool selection method | best path selection | |
| Max. tool diameter (full tool) | mm | 25X25 |
| Maximum tool length | mm | 200 |
| Maximum tool weight | kg | 5 |
| Tool - Tool Change Time (T to T) | sec | 0.8 |
| Chips – Chip change time (C to C) | sec | 0.8 |
| End Face turning tool holder 25x25 | mm | 4 |
| cover plate | mm | 4 |
| H Type Milling Drill Holder (Driven Tool) | mm | 1 |
| V-Type Milling Drill Holder (Driven Tool) | mm | 1 |
| Outer circle turning tool holder 25x25 | mm | 3 |
| Boring tool holder Φ 40 | mm | 2 |
| Boring tool sleeve Φ 32xΦ 40 | mm | 1 |
| Boring tool sleeve Φ 32xΦ 40 | mm | 1 |
| central lubrication system | ||
| Pump type | pressure relief | |
| motor | Shield type AC110/220V 2P 100W | |
| electric current | A | 2 |
| capacity | L | 2 |
| control method | PLC | |
| Oil injection interval time | Min | 30 |
| Saturation time | Sec | 3 |
| pressure detection | 15bar ON / 12bar OFF | |
| Liquid Level Switch | 0.2L ON | |
| Distributor type | volumetric | |
| Dispenser output | cc | 0.3 |
| Cutting Cooling System | ||
| Pump | w | 180 |
| flow | L/min | 135 |
| lift | M | 38 |
| tank capacity | L | 250 |
| Mechanical parameters | ||
| X-axis roller track size | mm | 35 |
| Z axis roller track size | mm | 35 |
| Y-axis roller track size | mm | 35 |
| X-axis ball screw size | Φ | 32 |
| Z axis ball screw size | Φ | 36 |
| Y-axis ball screw size | Φ | 32 |
| X-axis ball screw lead | mm | 12 |
| Z axis ball screw lead | mm | 16 |
| Y-axis ball screw lead | mm | 10 |
| Machine weight (approx.) | kg | 7500 |
