Specification
| Item | Unit | VMC 850Q | |
| Table | |||
| Table size | mm | 1000×500 | |
| Max.allowed loading | kg | 600 | |
| T slot size | mm×N | 18×5 | |
| Machining range | |||
| X axis travel | mm | 850 | |
| Y axis travel | mm | 500 | |
| Z axis travel | mm | 540 | |
| Distence between spindle nose to table | Max. | mm | 660 |
| Min. | mm | 120 | |
| Distence between spindle center to guideway surface | mm | 640 | |
| Spindle | |||
| Taper (7:24) | - | BT40 | |
| Speed | r/min | 10000 | |
| Torque | N.m | 35.8/70 (S2 15Minutes) | |
| Main motor power | kW | 7.5/11 | |
| Drive type | - | Synchrono us belt | |
| Tooling | |||
| Tool holder | - | MAS 403 BT40 | |
| Pull stud | - | MAS 403 40BT- 1 | |
| Feed | |||
| Rapid feed | X axis | m/min | 48 |
| Y axis | m/min | 48 | |
| Z axis | m/min | 48 | |
| Motor power(XYZ) | kW | 1.8/1.8/3 | |
| Motor torque(XYZ) | Nm | 11/11/20 | |
| Feeding speed | mm/min | 1-20000 | |
| Toot Magazine | |||
| Type | - | Robot | |
| Tool collection | - | Nearest tool selection | |
| Magazine capacity | - | 24 | |
| Max.tool length | mm | 300 | |
| Max.tool weight | kg | 7 | |
| Max.tool disk dia. | Full | mm | Φ80 |
| Nearby | mm | Φ150 | |
| Tool change time | s | 2.5 | |
| Distence between table to ground | mm | 880 | |
| Machine weight | kg | 5100 | |
| Electricity capacity | KVA | 18 | |
| Overall Dimensions (L×W×H) | mm | 2400×2560×2700 (without conveyor) | |
Characteristic
Samples
Factory Tour
