| Main specifications | Unit | CK61125F |
| Spindle center height | mm | 635 |
| Swing over bed | mm | 1250 |
| Swing over carriage | mm | 900 |
| Max. workpiece length | mm | 1500 |
| Max.turning length | mm | L-250 |
| Max. load between centers | kg | 8000 |
| Bed width | mm | 970 |
| Spindle noses No | - | A2-15 |
| Front bearing diameter of spindle | mm | 200220 |
| Spindle taper hole | - | Metric No.140 |
| Diameter of spindle bore | mm | 130、100 |
| Steps of spindle speed | - | Automatic 4-speed stepless |
| Spindle speed | rpm | 4-630 |
| Spindle motor | kW | AC22/30~40 |
| Torque of longitudinal servo motor | Nm | 41 |
| Torque of cross servo motor | Nm | 41 |
| Section of tool shank | mmxmm | 45×45 |
| Positions of tool post | - | Vertical 4/Horizontal 8, 12 |
| Repeated postioning accuracy of tool post | " | 2 |
| Travel of cross slide | mm | 650 |
| Feed speed of longitudinal | mm/min | 1～2000 |
| Feed speed of cross | mm/min | 1～2000 |
| Rapid travel of longitudinal and cross | mm/min | X:6000/Z:4000 |
| Diameter of tailstock quill | mm | 200 |
| Travel of tailstock sleeve | mm | 300 |
| Travel of tailstock quill | - | Morse 6 |
| Accessories(steady rest) | mm | φ50~φ470 |
| Accessories(follow rest) | mm | φ50~φ220 |
| Weight of the lathe with 3m | kg | 13000 |
| Increase weight per meter | kg | 1200 |
