Specification
| Item | CWA6185 | |
| CWA6285 | ||
| Swing over bed | mm | 850 |
| Swing over gap | mm | 1150 |
| Swing over carriage | mm | 510 |
| Maximun turning length | mm | 1500-16000 |
| Maximum weight of workpiece between centers | kg | 4000 |
| Width of the bed | mm | 600 |
| Spindle noses No. | ISO | A2-11 |
| Diameter of spindle front bearing | mm | 160 |
| Diameter of spindle hole | - | 100 |
| Taper hole of spindle | - | Metric No.120 |
| Number of spindle speeds | - | Manual 4-speed stepless |
| Range of spindle speeds | R/min | 5-630 |
| Main motor power | kw | AC15 |
| Rapid travelling speed of motor power | kw | 1.1 |
| Section of tool shank | mm | 32x32 |
| Swing angle of tool post | - | ±90° |
| Travel of tool post | mm | 250 |
| Travel of cross slide | mm | 600 |
| Rapid travelling speed of tool post | mm/min | 900 |
| Rapid travelling speed of transverse | mm/min | 1800 |
| Rapid travelling speed of longitudinal | mm/min | 3640 |
| Metric Threads number and range | mm | 56, 1-120 |
| Inch threads number and range | T.P.I | 56,30~1/4” |
| Module threads number and range | mm | 56,0.5-60 |
| Diameter pitch threads number and range | D.P. | 56,60-0.5 |
| Longitudinal number and range of feeds | m/rev | 64,0.08-9.6 |
| Transverse number and range of feeds | m/rev | 64,0.04-4.8 |
| longitudinal tool post number and range of feeds | m/rev | 64,0.02-2.4 |
| Diameter of Tailstock quill | mm | 120 |
| Taper hole of tailstock quill | Morse No.6 | |
| Travel of tailstock quill | mm | 250 |
| Weight of the lathe with 3m b.c. | kg | 6800 |
| Additional weight par 1 m b.c. | kg | 600 |
| Machine overall dimension (Length x width x height) (3m) | mm | 5150x 1500x 1500 |
Characteristic
Famous AC inverter variable speed device has been selected by the machine, the main driving has been driven by AC motor,4 step infinitely variable can be realized by sliding the gear.excellent performances of torque and power has been equipped.The operating system of the machine has been controlled by electric,hydraulic, mechanical mechanism,the carriage has functions of rapid traverse and combinating feed, easy for operating.Standard Configuration
•4-jaw chuckφ800mm •Center •Lighting unit •Cooling unit •Special toolsOptional Configuration
•3.4-jaw chuck φ320mm,φ800mm,φ1000mm •Steady rests φ40~φ350mm,φ50~φ470mm,φ100~φ520mm •Roller supporting device φ180~φ520mm •Follower rest φ30~φ120mm •Taper turning device •Boring deviceFactory Tour
