Top-Quality Spline Rolling Machines From XINYUE Factory - CZ-24NCS, 36NCS, 48NCS Models Available

Specification

Technical Parameter	Unit	CZ-24NCS	CZ-36NCS	CZ-48NCS
Loaded Tool Length	Inch	24	36	48
Max. Module	m	1.25	1.75	2.00
Max. Teeth Diameter	mm	40	50	60
Workpiece Length	mm	800	800	800
Cylindricity	mm	0.015	0.015	0.02
Roughness	μm	0.4-1.6	0.4-1.6	0.4-1.6
Max. Roll Forming Length	mm	100	120	150
Roll Forming Capacity Factor	mm	50	70	100

Characteristic

1. Cumulative adjustment of circumferential distance This innovation makes it easy to compensate for deviations in tool symmetry, completely solving problems that must be handled by tedious mechanical or shim adjustments. Better cumulative accuracy of circumferential pitch can be achieved. 2. Optimized synchronization of the main slide The control system adopts nano-level calculation to make synchronization performance better than gear synchronization or gearbox synchronization. 3. Multi-stage CNC roll forming Full CNC machine can complete multi-stage roll forming with different parameters on the same workpiece, which is called the king of roll forming. 4. CNC Motor Drive With Low Energy Consumption Compared with hydraulic drive, CNC-drive saves 70% energy, which meets the needs of the times. So it is low consumption high efficient equipment in the true sense. 5. High Performance With Less Procedures Multi-stage processing technology reduces labor intensity, making it possible for a person to operate multiple devices; and it also reduces product flow, uses less procedures and reduces product clashes. 6. Horizontal Pre-Pull Structure The optimized internal stiffener arrangement and six-sided frame, and domestic patented combination sliding stud connection greatly enhance the overall rigidity, stability, reliability, security, which guarantees a longer service life of the machine. 7. User-Friendly Operation Interface The system can display fault information, processing count, timing, storage program, detection of the total length of the workpiece, anti- faulty or empty clamping, self-learning and so on.

Parts Machined By Roll Forming Machine

Suitable for straight teeth and helical gear teeth on various shaft parts such as gearbox gear shaft, cage constant velocity universal joint, spline shaft, motor shaft, textile roller, spring torsion bar, steering gear, crankshaft, etc. product-description1

Roll forming machine roll forming process

Multi-stage roll forming process

Processing principles

The principles of cold-roll forming are that the roll forming cutter dies installed on the sliding table operate in opposite linear motion. The workpiece splines are formed by the increasing teeth amount of the roll forming cutters, and the final shaping precision and stability of the splines are obtained by the rigid distance between the two roll forming cutters. The opposite linear movements of the roll forming cutters are driven by hydraulic machine and the high synchronization of the two roll forming cutters is guaranteed by the racks and pinions. The synchronization of two roll forming cutters is guaranteed by the ball screws on the CNC machine. (Its synchronization accuracy is higher)

XINYUE Spline Rolling Machine CZ-24NCS 36NCS 48NCS

Products Details